logo

Please select an application area.

Application area

Select the surface to be covered:
Floor / wall / ceiling


Which energy sources do you want to use?

Temperature systems

Please select the type of heat generation.

Electric: direct heating with electricity (heating only)
Water-led: classic heat distribution, cooling also possible with heat pump.


Application area

Select the surface to be covered:
Floor / wall / ceiling

Temperature systems

Please select the type of heat generation.

Electric: direct heating with electricity (heating only)
Water-led: classic heat distribution, cooling also possible with heat pump.

Use as

Use

The use limits the constructions depending on the maximum possible load.


Special requirement

Special request

Delivers all constructions that match the requirements.
All other filters are deactivated.

All settings except 'application area' are removed.

Use

The use limits the constructions depending on the maximum possible load.

Special request

Delivers all constructions that match the requirements.
All other filters are deactivated.

Please enter the maximum height (without flooring height) in mm

Installation height

What maximum installation height is available?

If it is already known, you can provide information on the extent to which unevenness is to be expected (max. permitted is 3 mm / running meter).

Additional insulation can also be planned.

Maximum available height
(without flooring) 
≤ 10 mm
≤ 250 mm
floor compensation 
0 mm
80 mm
Additional insulation required? 
 
Your installation height:

Installation height

What maximum installation height is available?

If it is already known, you can provide information on the extent to which unevenness is to be expected (max. permitted is 3 mm / running meter).

Additional insulation can also be planned.

What floorings do you want to use?

Floor coverings

Select the desired floor coverings.

Floor coverings

Select the desired floor coverings.

Which distribution layer do you want to use?

Load distribution layer

The load distribution layer is the load-bearing layer on the underfloor heating system.

Dry screeds are used as standard and offer the flexibility to accommodate any floor covering.

The CompactFloor products are special dry screed optimizations for underfloor heating systems.

Safetec is a very low load distribution layer with a construction height of just 10 mm and optimum thermal conductivity.

Load distribution layer

The load distribution layer is the load-bearing layer on the underfloor heating system.

Dry screeds are used as standard and offer the flexibility to accommodate any floor covering.

The CompactFloor products are special dry screed optimizations for underfloor heating systems.

Safetec is a very low load distribution layer with a construction height of just 10 mm and optimum thermal conductivity.

Which Systems/Products do you want to use?

Systems / products

Make your system selection to narrow down the design suggestions even further.

electric:
water-operated:

Systems / products

Make your system selection to narrow down the design suggestions even further.

Result: 212 hits
Sort by:
K 01101
K 01101 - STRONGBOARD FL | Tile - System IDEAL CLASSIC EPS 30
System IDEAL CLASSIC EPS 30
STRONGBOARD FL | Tile
from 35 mm
K 01102
K 01102 - STRONGBOARD FL | Tile - System IDEAL CLASSIC EPS 30
System IDEAL CLASSIC EPS 30
STRONGBOARD FL | Tile
from 55 mm
K 01111
K 01111 - STRONGBOARD FL | Laminate and parquet - System IDEAL CLASSIC EPS 30
System IDEAL CLASSIC EPS 30
STRONGBOARD FL | Laminate and parquet
from 35 mm
K 01112
K 01112 - STRONGBOARD FL | Laminate and parquet - System IDEAL CLASSIC EPS 30
System IDEAL CLASSIC EPS 30
STRONGBOARD FL | Laminate and parquet
from 55 mm
K 01121
K 01121 - CompactFloor® DIRECT 1.5 - System IDEAL CLASSIC EPS 30
System IDEAL CLASSIC EPS 30
CompactFloor® DIRECT 1.5
from 31 mm
K 01122
K 01122 - CompactFloor® DIRECT 1.5 - System IDEAL CLASSIC EPS 30
System IDEAL CLASSIC EPS 30
CompactFloor® DIRECT 1.5
from 52 mm
K 01211
K 01211 - Direct support solid wood flooring on stock timbers - System IDEAL CLASSIC EPS 30
System IDEAL CLASSIC EPS 30
Direct support solid wood flooring on stock timbers
from 30 mm
K 01212
K 01212 - Direct support solid wood flooring on stock timbers - System IDEAL CLASSIC EPS 30
System IDEAL CLASSIC EPS 30
Direct support solid wood flooring on stock timbers
from 50 mm
K 01301
K 01301 - Dry screed element (Fermacell 20 mm) - System IDEAL CLASSIC EPS 30
System IDEAL CLASSIC EPS 30
Dry screed element (Fermacell 20 mm)
from 50 mm

You are in a special construction area. Please contact our support.

  • phone: +49 (0) 54 06 / 6 99 95-10
  • mail: mail@mfh-systems.com

You are in the Special Designs section. Please contact our support team for individual advice.

  • phone: +49 (0) 54 06 / 6 99 95-10
  • email: mail@mfh-systems.com